Example:Rod,Rod pin,Bush...
Checking the gas pressure of your hydraulic breaker/hammer
2011-04-22 From:http://www.ylfpart.com
Key words:hydraulic breaker,hydraulic hammer,rock breaker,rock hammer
Digest:
Checking the gas pressure of your hydraulic breaker/hammer
1. Remove the adapter cap of hydraulic breaker/rock hammer.
2. Turn charging valve wheel counterclockwise and then release valve wheel clockwise to prevent nitrogen gas loss.
3. Attach the charging valve onto the adapter.
4. Tighten charging valve cap clockwise.
5. Turn the charging valve wheel clockwise to check gas pressure of hydraulic breaker.
6. Turn the charging valve wheel counterclockwise of hydraulic hammer.
7. Turn the release valve wheel counterclockwise to release gas pressure in the charging valve.
2. Turn charging valve wheel counterclockwise and then release valve wheel clockwise to prevent nitrogen gas loss.
3. Attach the charging valve onto the adapter.
4. Tighten charging valve cap clockwise.
5. Turn the charging valve wheel clockwise to check gas pressure of hydraulic breaker.
6. Turn the charging valve wheel counterclockwise of hydraulic hammer.
7. Turn the release valve wheel counterclockwise to release gas pressure in the charging valve.
Reverse:
Important safty guidelines for... | Next:
Hydraulic breaker/hammer gas c...
